Look at the Finish with Your Hands
Finishing wood has several benefits, with the main one being protection. Finished wood is protected from contaminants and other fluids (especially water) that could ruin the piece. Finishing wood also makes the piece look more beautiful than a raw piece of wood. It adds depth and brings out details that would be completely hidden otherwise. Finishing wood also makes a piece just seem, for lack of a better word, finished, like someone cares, like it is more valuable. A good finish is nice and smooth and begs to be touched. Reaching out and touching a finished piece of wood seems to be an instinctual way to determine the overall quality, like smelling your food before taking a big bite. I can tell you from lots of personal experiences that the first thing customers do when they see a newly finished piece of furniture is to reach out and touch the wood. They are using their eyes to look at it at the same time, but they are doing half of their looking with their hands. With that in mind, I would suggest that you do at least half of your looking with your hands when finishing a piece of wood.
Your hands can tell you so much about a surface that your eyes can’t. First of all, you can feel lots of places that you cannot see, whether it simply be hidden from view from a lack of light or from a lack of access or maybe just that it is in a bad position at the time. A great example of all of these is on chair work. A chair is meant to be seen from all angles and there are usually lots of intersecting surfaces headed in all directions, with many hidden from view.
Your hands can also feel things in plain sight that your eyes might never see. This is especially true for clear finish coats. If you don’t have big, obvious, light-reflecting mistakes in a well-lit shop, they may not show up enough to see – that is until after you deliver it to your customer and they put it right in front of their big bay window, the one that is similar to the bay window you don’t have in your shop.
I use my bare hands continually through the finishing process. Combined with a low, raking light to help highlight imperfections, they create a dragnet that catches anything trying to make its way into the finished pice. And, the best part is that my hands never miss, they feel everything (except color).
Get your hands involved early in the finishing process, even during rough sanding and surface preparation. During this phase your hands will let you know if there are any dents or chips that aren’t obvious enough to see, and they will give you an overall feel for the surface, how smooth it is and if there are any unflat areas that need to be straightened out. It will give you a good idea where you need to spend more time sanding and point out areas of raised grain that you could never see with your eyes alone.
After you have finished sanding, use your hands, while you are blowing off the surfaces with compressed air, to wipe the surfaces clean. Your hands will loosen particles that would otherwise stick and the air can blow them away. In lieu of tack clothes (which I don’t own anyway), I always use this method, just wiping my hand on my pants as I go. While you are cleaning the surface, without noticing it, you will also be looking at the surface with your hands. You will feel anything that wasn’t adequately sanded the first time, and have a chance to take care of it before you are in too deep.
Your hands are also fantastic for work in-between finish coats too. At this point, the surface and color should be in great shape and any issues should be small and almost undetectable, except with your hands. After scraping or sanding the first sealer coat, use your hands to help clean the surface for the following coat, just like you did before applying the first coat of sealer. While you are wiping off the dust (and wiping it on your pants), you will feel any dust nibs or rough patches or even runs while you are working. Your hands will tell you everything you need to know about the quality of your surface and how you are progressing.
I usually apply one or two more coats of finish, each of which requires less work, but every one involving my hands to make sure the surface is ready for the next step. In fact, I use my hands so much that I am pretty sure I could do my work in-between finish coats without even using my eyes (insert your own joke here, I teed it up for you).
The next time you are working on a finish, get your hands more involved. Try to use your hands as much as your eyes to recognize what is going on with the surface, even in places that are hidden from view. You will be amazed at how much you can “see” with your hands.
With all the water based finishes-grain raising is a bad par…