Archive | Antique Carts RSS for this section

Factory Cart Bench

I have been through a lot of factory carts in the past couple of years, all of which have been repurposed into coffee tables. Things changed a bit when we built our first factory cart bench. It came about when a customer that wanted to have a bench made sent me some pinterest photos and one happened to have industrial cart wheels on it. That was a gimme for me because I happen to have in my possession about 50 carts that are already bench height.

This is our official, first-ever factory cart bench.

This is our official, first-ever factory cart bench.

We started by trimming the whole thing down from 28″ to 19″ in depth and cleaning all of the hardware. That was followed up by building the back and armrests out of wood we saved from other disassembled carts. After a little distressing around the new cuts and a light sanding overall, we stained all of the hard maple with a medium-dark brown stain before spraying a lacquer finish on the entire cart, including the hardware (I prefer the look of the hardware with a clear coat as opposed to black paint).

When the bench was almost finished, I told Chris (my wife) that I think we might need a factory cart bench in our house. She asked how much I charged for it and she then advised me that it would look much better in someone else’s home. I guess that is how it goes at the cobbler’s house too.

What is Going on at WunderWoods?

On a semi-regular basis I talk to someone who would have used me for their last project, but they didn’t because they didn’t know everything I do. My woodworking customers don’t know I mill lumber, my milling customers don’t know I sell lumber, my lumber customers don’t know I do custom woodworking, and I blame it all on my inept advertising department.

I am here to change all of that with a new video that shows what is really happening at WunderWoods (when I am working). With the help of a few of my customers, I have put together a montage of the goings on in a three-week span of my daily work life. The clips are chronological in order, but random in their approach. One day I cut a tree, the next day I finish a piece of furniture – just like real life.

The bottom line is that if it involves wood there is a good chance I do it.

About WunderWoods cover photo

Click to watch a short video and see what really happens at WunderWoods.

Thanks to Dwayne Tiggs from Crafty Naturals, Jermain Todd from Mwanzi, and Martin Goebel from Goebel and Company Furniture for starring in the video.

The following photos are of the finished products shown in progress in the video:

Elm is one of my favorite woods. In this case, we used all of the tree, including some big knots with lots of spunk.

Elm is one of my favorite woods. In this case, we used all of the tree, including some big knots with lots of spunk.

After seeing other cricket tables that the customer liked, she ordered this one in a bit smaller size. The top is 23" in diameter.

After seeing other cricket tables that the customer liked, she ordered this walnut version in a bit smaller size. The top is 23″ in diameter.




Antique Factory Carts Are Here, And Here, And Here…

When my shop burned down last November, I went shopping for tools. Most of my big equipment came from one shop that went out of business in South St. Louis. While I was there loading up, I noticed some old lumber carts that the movers were using to clean out the space. I didn’t know much about the carts and never needed them in the past, but my new shop is much bigger and the carts were cool, so I decided to make an offer on them. I didn’t really have any money to spend, so I didn’t feel that I should offer too much, but I dug deep and offered $30 a piece. My timing was impeccable because they really wanted the place cleaned up and the fact that I didn’t offer much was apparently not an issue.

I have four of these wider Nutting carts with the bigger corner pockets from my original purchase.

I only came back with eight carts, but those eight carts started a movement, or at least got me involved in one. I started using the carts right away. They are strong, roll easily and fit nicely in the shop. I use them to move lumber from tool to tool and my customers use them to get their wood to their trucks. I line them up like at Home Depot to try to encourage large-scale shopping. So, I have the shop looking nice with lumber on the walls and the carts lined up to move my awesome lumber. But the reverse started to happen. Customers initially come in to look at lumber, but they and especially their wives, are drawn to the carts. I try to direct their attention to the lumber, but they keep asking about the carts. Where did I get them? How many do I have? Are they for sale? NO PEOPLE! They are for moving lumber in the shop. I only have eight and I use them all. Now, focus and let’s look at some lumber.

I didn’t get it until finally someone told me that similar carts are selling at Restoration Hardware for $1,000 and they are selling them as coffee tables – old, dirty, ragged coffee tables. Now, it made sense. Everyone was picturing these carts in front of their couch and assumed that they could make that dream a reality for less than $1,000 by purchasing my carts. I didn’t sell any because I really liked them and just didn’t think selling half of them would greatly change my financial future, so I kept working along and customers kept gawking.

For a couple of months I held out. That was until Crescent Planing Mill in downtown St. Louis went out of business. They had been around forever and had been collecting lumber carts the entire time. When the auction flyer went out the lead items were more than 200 antique Nutting and Lineberry factory carts. I just knew they were going to be mine. I was local and hoped the auction wasn’t well advertised, which would make them sell for a lower price. I knew, if nothing else, that I had an advantage because I didn’t have to ship them.

This set of parts came from our favorite carts, made by Charles Francis and featuring heart-spoked wheels. I only have two of these.

I showed up to the auction to hang out with 50 of my closest friends, all of whom where there to buy carts. The bidding started out on the best carts and the going price was $150, and if I would have gotten involved it would have gone higher. $150 was a lot more than $30, so I didn’t bid. I was expecting $50-$60, maybe as high as $75, but I wasn’t sure enough about the market on old carts and went to look at the rest of the auction items. I went back for the sale on the final carts and the prices weren’t budging. I didn’t buy even one.

After all of the hubbub of the auction had died down, I went back to purchase from the unsold list (an advantage of being local). To my surprise then (not now) about 30 carts were on the unsold list. I was surprised because literally everyone their would have given at least $25 for the carts, so there was no reason for them to be unsold. I attribute this to the worst auction that the world has ever seen, but that is another in-depth reporting story (probably called “Scott on Your Side” or something like that). I negotiated for the remaining carts and got them for a much more reasonable price of $50 each. Many of them needed a little help, but at that age we will all need a little help.

I started selling those carts on ebay and the average sale has been about $300. That price is good for me, and I think the customers are happy to not spend $1,000. They certainly are still buying. My ads give as much information as possible, and I include my blog address and phone number so people can call and ask questions if they so desire. It turned out that one did desire, and I got a call from Chicago, IL.

Jim called, said he was shutting down a factory and would make me a deal on 221 carts if I could get them out that week. Even at a low price the total was large. I knew that even though I didn’t want to tell my wife, she would find out on something this big. So, I introduced the topic to her and didn’t know how she would take it. I thought there was a chance that she would be encouraged after recent sales, but the overall cost was too big, and she wasn’t. She told me why she didn’t think it was a good idea, that I should focus on the woodworking, that I needed to make money instead of spend it, and otherwise focus on what I was doing. After she told me all the reasons to not go, she asked, “So when are you going to Chicago?” She knows me pretty well.

The funny thing is that now I have so may carts I can’t get to the lumber. But, that doesn’t stop everyone from asking, “Do you have a cart I could put this on?”

%d bloggers like this: