Installing Live-Edge Floating Shelves in a Corner (and Wall to Wall)

Floating is pretty much the only way we install shelves anymore. We could install them other ways (you know, with brackets), but nobody wants brackets anymore. So, you might ask yourself, “If the only installation being requested these days is floating and the kids at WunderWoods install a lot of shelves, why was was it so hard for Scott to figure out how to put live-edge shelves in a corner?” Seems like he might have run into that before. The crazy answer is, no, I have not run into it before and no one has ever asked.

If you don’t give it a lot of thought, it doesn’t seem too much more difficult than a regular floating shelf installation. However, I was starting to think it was impossible (especially wall to wall) until I dreamed up a way to do it months after the initial request. While I was working on it and letting this part drag on, I remembered thinking, “I wonder how long it will be before brackets come back in style, so I can put up these corner shelves?”

My first, and only other plausible solution, was to install the rods and drill the holes at a 45 degree angle from the corner and slide the entire assembly (both shelves together) into the corner. This would technically work, if the corner is open, but it wouldn’t work if the corner was closed in on the ends and it sounded ridiculously hard to drill and install. It pretty much would never work. That was it. That was all I had for a long time.

I kept thinking about regular shelves and how nice it would be if I could just drop it on some shelf pins, or how nice it would be if they were just square-edged shelves and I could slide them in without fussing with that inside corner where the live edges crash at some random angle. Then, finally, I put the two ideas together. Slide the second shelf in at an angle on a post and drop the other side down into a funky joint on the other shelf. It is a tough one to explain without me being able to use my hands, so I put an animation in the video for you to see how it works.

Overall, the installation is the same as we do for live-edge mantels (click to see how to install a live-edge mantel) and other live-edge shelves. We do sometimes use Sheppard brackets, but they wouldn’t work in this case either. The main difference for this installation was the inside corner, which was cut on the CNC router. It’s a fun little joint which we cut quite often but with the addition of a little ledge. Check out the following video to see how it works. It’s a lot easier than me trying to explain it.