Installing Live-Edge Floating Shelves in a Corner (and Wall to Wall)
Floating is pretty much the only way we install shelves anymore. We could install them other ways (you know, with brackets), but nobody wants brackets anymore. So, you might ask yourself, “If the only installation being requested these days is floating and the kids at WunderWoods install a lot of shelves, why was was it so hard for Scott to figure out how to put live-edge shelves in a corner?” Seems like he might have run into that before. The crazy answer is, no, I have not run into it before and no one has ever asked.
If you don’t give it a lot of thought, it doesn’t seem too much more difficult than a regular floating shelf installation. However, I was starting to think it was impossible (especially wall to wall) until I dreamed up a way to do it months after the initial request. While I was working on it and letting this part drag on, I remembered thinking, “I wonder how long it will be before brackets come back in style, so I can put up these corner shelves?”
My first, and only other plausible solution, was to install the rods and drill the holes at a 45 degree angle from the corner and slide the entire assembly (both shelves together) into the corner. This would technically work, if the corner is open, but it wouldn’t work if the corner was closed in on the ends and it sounded ridiculously hard to drill and install. It pretty much would never work. That was it. That was all I had for a long time.
I kept thinking about regular shelves and how nice it would be if I could just drop it on some shelf pins, or how nice it would be if they were just square-edged shelves and I could slide them in without fussing with that inside corner where the live edges crash at some random angle. Then, finally, I put the two ideas together. Slide the second shelf in at an angle on a post and drop the other side down into a funky joint on the other shelf. It is a tough one to explain without me being able to use my hands, so I put an animation in the video for you to see how it works.
Overall, the installation is the same as we do for live-edge mantels (click to see how to install a live-edge mantel) and other live-edge shelves. We do sometimes use Sheppard brackets, but they wouldn’t work in this case either. The main difference for this installation was the inside corner, which was cut on the CNC router. It’s a fun little joint which we cut quite often but with the addition of a little ledge. Check out the following video to see how it works. It’s a lot easier than me trying to explain it.
Asian-inspired mahogany shelves fit right in
We recently installed a set of three mahogany shelves with an asian inspiration. Our customer, who also happens to have a parent from Thailand, lived in Japan while she was in the military where she was inspired by the architecture. There is an air of this asian influence in the house already and she wanted to continue with that theme in her hallway along the stairs. She sketched up the design for the three units and let us roll from there.
The units are built out of solid wood, 8/4 mahogany, with most of the boards single width. They are connected with Domino connectors from Festool, which is a new favorite for loose tenon wood joinery. They are fast, accurate and strong, and quickly becoming the new standard in the industry, even if everyone doesn’t want to admit it (more on that some other day).
Most of the video below is focused on the finishing process, which is also where most of the time was spent. It included plenty of sanding before construction and tons more after. The mahogany is rather soft, so any rough handling along the way just added to all of the sanding fun.
I used Minwax Espresso stain for the color and Magnalac (modified lacquer) for the finish. I like the ease of application of the Magnalac and its forgiveness if I need to rework any areas.
The shelves fit into existing openings, and even though I didn’t show it in the video, they did actually get some fasteners after the satisfying slide into place (it just seemed like a great place to end the video).
What’s Going on at WunderWoods
Everyone always asks what I do. Here's the answer. Click on the photo above for a short video tour and see all of the steps it takes to go from a tree to finished furniture.